Antistick ECO · a product range from Eco-Nova
Rapeseed oil-based release agents for pavers, rollers and troughs
Antistick ECO, made from plant-based raw materials, prevents bitumen and asphalt from sticking to machinery and tools. Manufactured in Schüttorf, supplied in drums or IBCs.
- Not classified as hazardous according to the safety data sheet
- Not classified as dangerous goods under ADR
- Flash point above 150 °C
- In laboratory tests, around 75 % less vapour and aerosols than with diesel
- 200-litre drum and 1,000-litre IBC
From 1 January 2027 The occupational exposure limit for bitumen vapours and aerosols (1.5 mg/m³) also applies to the laying of rolled asphalt. In its sector-specific guidelines, BG BAU advises against the use of release agents containing mineral oil. In laboratory tests, the readings for Antistick ECO were around three-quarters lower than those for diesel – to the result.
The series
Which ECO anti-stick coating is suitable?
All three are based on plant-derived raw materials (rapeseed oil methyl ester) and, according to the safety data sheet, are not classified as hazardous. Three questions will help you choose.
1
An automatic sprinkler system with fine nozzles?
Next, the Antistick ECO 150 LV – which recorded the lowest reading of the range in laboratory tests.
2
Long transport routes, PmB, multiple loadings or long downtimes?
Then Antistick ECO 170.
3
Anything else?
Antistick ECO 150 is the standard choice for most applications.

Antistick ECO 150 LV
For automatic spray systems with fine nozzles
- Flash point above 150 °C
- Viscosity: medium
- Fine nozzles, tight filters
- Laboratory test: 105.9 mg/m³ (diesel: 543.5)

Antistick ECO 170
Thicker – for long-lasting adhesion and high temperatures
- Flash point above 170 °C
- Viscosity: high (thick)
- Long transport routes, PmB
- Laboratory test: 141.1 mg/m³ (diesel: 543.5)

Antistick ECO 150
The standard for most applications in asphalt construction
- Flash point above 150 °C
- Viscosity: low (low viscosity)
- Manual and automatic
- Laboratory test: 120.6 mg/m³ (diesel: 543.5)
Areas of application
Where Antistick ECO is used
Road paver
Drum, screw and tamper
Rollers
Casing on tandem rollers, tyres on rubber-tyred rollers
Troughs
Transport and refrigerated bodies for lorries
Hand tools
Shovel, rake, trowel
Asphalt boiler
Cooker and container for hot food
Moulds & Formwork
e.g. in the manufacture of concrete blocks
Comparison
Rapeseed oil-based or hydrocarbon-based
A factual comparison of our own release agents – based on the information provided in the safety data sheets.
| Antistick ECO 150 / 150 LV / 170 | Antistick 130 / 140 | |
|---|---|---|
| Raw material base | plant-based raw materials (rapeseed oil methyl ester) | Hydrocarbons; at 140, white oil (mineral oil) is also present |
| Classification according to the SDS | not classified as dangerous | GHS08, Hazard, H304, EUH066 |
| Flash point | above 150 °C (ECO 170: above 170 °C) | above 129 °C (130), 137 °C (140) |
| Transport | Not classified as a dangerous good under ADR | Not classified as a dangerous good under ADR |
| Storage | 5–30 °C, frost-free | 5–30 °C |
| In frosty weather | may thicken; ready for use again once heated | – |
| Transition | Use up any remaining stock, flush the system, do not mix | – |
Laboratory test
Around three-quarters fewer fumes and aerosols than with diesel
TPA GmbH (Hamburg Laboratory) has measured the levels of vapours and aerosols produced by hot asphalt mix – without a release agent, with Antistick ECO and with diesel. The measurements were carried out in accordance with the method of the DGUV Institute for Occupational Safety and Health (IFA Workbook 6305, Method 1) on SMA 8 S mastic asphalt at 150 °C.
Result: With Antistick ECO, the measured values were 74 to 80 % lower than those with diesel. Diesel caused the value to rise to around five times that of the mixture without a release agent. Antistick ECO 150 LV was almost on a par with the level achieved without a release agent.
Without release agent (reference) · 104.0 mg/m³
Antistick ECO 150 LV · 105.9 mg/m³
Antistick ECO 150 · 120.6 mg/m³
Antistick ECO 170 · 141.1 mg/m³
Diesel · 543.5 mg/m³
Work on a building site is never carried out entirely without a release agent. It is therefore crucial to compare this with a substance that is still frequently used: diesel. Diesel is a mineral oil product, and BG BAU advises against the use of release agents containing mineral oil.
Test report by TPA GmbH, Hamburg Laboratory, dated 6 October 2026: Measurements carried out in accordance with IFA Workbook 6305, Method 1, using SMA 8 S mastic asphalt at 150 °C; one measurement per variant; analysis carried out by the ANECO Institute for Occupational Safety. The laboratory results demonstrate the influence of the release agent in a direct comparison. They are not comparable with measurements taken on site or with the workplace exposure limit; in those contexts, the values are significantly lower. We will send you the full test report on request.
Transition
Four steps to Antistick ECO
1
Use up the remaining stock
Do not mix hydrocarbon-based release agents with Antistick ECO.
3
Insert the test sample
Test 10 or 20 litres on your own premises – on your machine, using your own mix.
4
Planning the season
Delivery in drums or IBCs, tailored to your requirements.
Documents
For procurement, tendering and health and safety
- Technical Data Sheet
- Tender document
- Safety Data Sheet – for existing customers, and for trial quantities or demonstrations, available on request
- Information for the risk assessment
Are you already a Green4Clean customer?
You can now obtain Antistick release agents directly from Eco-Nova – with the same products, item numbers and contact persons. Antistick 130 and 140 remain in the range for existing customers: Antistick 130 · Antistick 140.
FAQ
Frequently asked questions about release agents
Can Antistick ECO replace a hydrocarbon-based release agent?
In most asphalt construction applications, yes. Use up the remaining stock, flush the plant and test Antistick ECO beforehand using a test quantity of 10 or 20 litres.
How much vapour and aerosol is produced by Antistick ECO compared with diesel?
In the laboratory test conducted by TPA GmbH (IFA Workbook 6305, SMA 8 S, 150 °C), the total measured value with Antistick ECO 150 LV was 105.9 mg/m³, with ECO 150 it was 120.6 mg/m³ and with ECO 170 it was 141.1 mg/m³. With diesel, the figure was 543.5 mg/m³, and without a release agent, 104.0 mg/m³. Antistick ECO was therefore 74 to 80 % lower than diesel. Laboratory results are not comparable with on-site measurements. We will send you the test report on request.
Can I mix Antistick ECO with other release agents?
No. Do not mix Antistick ECO with hydrocarbon-based release agents. Flush the tank, pipes and nozzles before switching over.
What happens when there’s a frost?
Store Antistick ECO in a frost-free place at a temperature between 5 and 30 °C. It may thicken if exposed to frost; once warmed up, it is ready for use again.
What changes will there be to the laying of rolled asphalt from 2027?
From 1 January 2027, the occupational exposure limit of 1.5 mg/m³ for vapours and aerosols from bitumen will also apply to rolled asphalt. In its sector-specific guidelines, BG BAU lists the avoidance of mineral oil-based release agents as one of the protective measures.
What sizes are available, and how quickly are they delivered?
Antistick ECO is available in 10, 20 and 60-litre containers, in 200-litre drums and in 1,000-litre IBCs. We will provide you with the delivery date and price in our quotation.
I’ve always ordered from Green4Clean. What’s changing?
The products, item numbers and contact persons remain the same. You can now place your orders directly with Eco-Nova in Schüttorf.
Enquiry
Request a quote or a sample
Please let us know the product, your approximate annual requirement, the packaging size and the delivery address. We will provide you with a quote tailored to your quantity. Sample quantities of 10 or 20 litres are available.

Mareen Portheine
Sales & Technical Support · German, Dutch, English

Saskia Wolbers
In-house Sales & Back Office · German, Dutch, English